Probonder Contact and Spray Adhesives
PROBONDER Contact and Spray Adhesives Range:
PROBONDER Contact Spray Adhesive
PROBONDER will bond to a wide variety of subfloors including concrete, sand / cement screed, plywood, flooring grade chipboard and hardboard. It is ideal for permanent bonds that
require good initial bond strength. It provides good temperature resistance and, if protected from contamination, has an open time of several hours.
PROBONDER MS – Non-Chlorinated Mist Spray Contact Adhesive
PROBONDER MS spray adhesive is designed to give 100% coating on both surfaces in one pass. It has a mist spray pattern distinctly different to the web. This makes it easy to apply, with more confidence that the required coat weight is being applied. The finish is a smooth, even layer suitable for bonding thin or high gloss laminates to various substrates including MD, chipboard, plywood and other timber sheet materials.
PROBONDER MS – More Product DetailsPROBONDER SP – Premium Non Chlorinated Contact Adhesive
PROBONDER-SP is our next generation adhesive canister using innovative solvent technology meaning that the adhesive maintains a low hazard to human health due to its low toxicity, as well as
providing minimal impact to the environment. PROBONDER-SP has all the advantages of PROBONDER including high bond strength, high heat resistance and fast drying times but is completely non-chlorinated.
PROBONDER FR – Premium Non Chlorinated Contact Adhesive NCFR476
PROBONDER-FR will bond a wide variety of substrates, including wood, metals, rubber, fabric, most plastics, cardboard, polythene and concrete, as well as decorative laminates. It is ideal for
permanent bonds that require good initial bond strength. It provides good temperature resistance and if protected from contamination has an open time of several hours.
PROBONDER Foam – Foam & Polystyrene Spray Adhesive
PROBONDER-FOAM is designed for bonding polystyrene to itself and various substrates including mdf, chipboard, plywood and other timber sheet materials. It will also bond to most common building materials such as plasterboard, aluminium, concrete, brickwork and steel. Do not use on flexible PVC.
PROBONDER Foam – More Product DetailsPROBONDER UHT – Upholstery High Tack Spray Adhesive
PROBONDER-UHT 22 Litre Canister is a premium high tack aerosol adhesive which bonds a wide variety of materials giving a rapid and strong bond formation and is economical in use. UHT is suitable for bonding most materials used in the upholstery industry such as Hessian, foams, fibrous materials, fabrics, insulation, polythene foam, etc. to themselves and wood, metal etc. UHT is also suitable for sticking un gummed labels, paper, cardboard etc. to a variety of packaging materials.
PROBONDER UHT – More Product DetailsIndasol NC-FR-476 Non-Chlorinated (Class 0) Fire Rated Contact Adhesive
INDASOL NC-FR-476 is a premium Non-Chlorinated, Flame Retardant contact adhesive with an extremely high solids content, greatly reducing the risk of low coat weight. This fine web-spray adhesive is designed for permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required. Never before has a non-chlorinated spray adhesive achieved such a high British Standard for smoke, flame and toxicity testing, along with the 1 hour surface spread of flame test. It has been tested and passed BS476: Part 6.
Indasol NC-FR-476 – More Product DetailsFor full information regarding Best Practices and Application of our Adhesives, please refer to our User Guide.
When working with Adhesives and Sealants or any bonding product, it is vital that the surface is cleaned correctly. Each surface needs to be free from dirt, grease and contamination prior to bonding. In some cases a primer may be required and it is critical that the correct primer is used. It may also be the case that light abrasion is required to help the bonding product key into the surface.
Due to the changing raw material content and surface finishes of some substrates, it is essential that all of our adhesives and tapes should be tested by the customer to ensure substrate and performance compatibility for each application. Please contact us for any advice. We do not accept any liability for product failure.