Cleaners and Primers
INDASOL have a complete range of surface cleaning and priming products, designed to be used to give the best bonding and sealing finish. To discuss your needs and answer any questions, please contact us on the details below.
The following is a sample of the types of products we offer:
Isopropyl Alcohol (IPA): this is an alcohol based, residue free cleaner designed for removal of greases, finger marks and general contamination from substrates.
PR100: the best UHB primer for high performance Structural Bonding using UHB tapes. See our UHB Tapes page for full details.
UHB PR100 Easy Application Bottle: Designed to make priming easy, this new bottle has a sponge application head with a self-sealing centre plunger. When pushed onto the substrate, the plunger releases the primer into the sponge head, so as you travel along your bond line, the primer is deposited exactly where required. Once released the plunger seals and the primer stops flowing. Ideal for those on site jobs where you don’t want liquid being spilt or if you want to reduce the amount of primer you are using.
SP450: IPA and UHB primer all in one. This is great for Semi Structural Bonding with UHB.
1960: specifically designed for use with our 2 part structural adhesives to prime and seal certain surfaces prior to bonding.
Our Structural Adhesives page has full details of these products.
Silane Glass: for use on glass surfaces prior to tape or adhesive bonding. This helps the bonding product key into the glass for a long term secure bond.
SignBlock Polyester Primer: a 2-component spray high build primer designed for use with SignBlock to help create a solid surface finish prior to paint.
DSI: adhesive remover and high performance degreaser.
Antibacterial Surface Wipes – Multi Task
Helps reduce the spread of bacteria. Ideal for quickly and easily cleaning up hands, tools and most surfaces without the need for water.
Designed to remove wet paint, wet PU foam, adhesives, tar, sealants, fillers, grease, grime, oil, asphalt, lubricants and everyday soiling.
The tough, absorbent and recyclable wipe material contains anti-bacterial properties. Dermatologically tested.
FUSION Cleaner – Plastic adhesive remover and cleaner
– Used to remove fresh acrylic adhesive errors, runs, finger marks, etc
– Use via a clean lint free cloth
– With a one wipe application
– Datasheet: FUSION CLEANER – SDS10533
FUSION Surface Prep – Plastic Preparation Cleaner
– Rapid drying prep fluid
– Leaves a squeaky clean surface prior to printing or bonding
– Use with a clean lint free cloth
– Datasheet: FUSION SURFACE PREP – SDS10561
ANTISPEX – Anti-Static All Plastics Cleaner
– Anti-static cleaner for all plastics including polycarbonate
– Removes soiling and marks
– Leaves a static-free finish
– Rapid drying
SIGN WASH – Cleans & Enhances Signage
– Deep clean for signs
– Used on all types of signage
– Spray on, hose off
– Enhances and revitalises
– Hard and soft signage
– Datasheet: SIGN WASH – SDS10577
When working with Tapes, Adhesives, Sealants, UHBs or any bonding product, it is vital that the surface is cleaned correctly. Each surface needs to be free from dirt, grease and contamination prior to bonding. In some cases a primer may be required and it is critical that the correct primer is used. It may also be the case that light abrasion is required to help the bonding product key into the surface.
Due to the changing raw material content and surface finishes of some substrates, it is essential that all of our adhesives and tapes should be tested by the customer to ensure substrate and performance compatibility for each application. Please contact us for any advice. We do not accept any liability for product failure.
In some cases certain surfaces are not suitable for using the above cleaners and primers. Please check with our Technical experts for compatibility.
When using UHB products, cleaning and priming is normally advised. Visit our UHB Application Guide for more information.