Fraud Blocker

TensorGrip S105 Acetone Cleaner

TensorGrip® S105 Acetone Cleaner is a solvent cleaner and hose flush. It has been specifically designed for use with TensorGrip® PU canister products as a Hose & Spray Gun Flushing System.

It can be used safely on most canister spray equipment and is a strong solvent.

This product can be used safely on most surfaces and substrates including painted surfaces, glass, porcelain, concrete, and is compatible with many plastics and vinyls.

Features:

  • Efficient clean-up & maintenance.
  • Compatible with most adhesives.
  • Compatible with most plastics.
  • 13.7 Litre Canister or 150ml Aerosol

For a quote for Tensorgrip S105 or expert technical help then please contact us today.

Description

Technical Information For TensorGrip S105:

• FLAMMABILITY: EXTREMELY FLAMMABLE, VAPOURS HARMFUL AND MAY IGNITE. FLAMMABLE
• Appearance: Solvent odour, Clear in colour
• Specific Gravity: 0.72 ± 0.02 g/l (6.0 ± .02 lb/gal)
• Solubility in Water: Negligible
• Solvent: Acetone
• SHELF LIFE: 18 Months From Date Of Manufacture

Download Data Sheet For TensorGrip S105:

TensorGrip-S105-TDS.pdf

Directions For Use:

Spray approximately 6-8” from surface. Allow cleaner to remain on surface for a few seconds then using a clean cloth, wipe off adhesive and/or soil. Wipe thoroughly to obtain a residue free clean surface. For very obstinate adhesive and soil, allow cleaner to come in contact with adhesive/soil for longer time before wiping, or you may need to apply successive applications.
• Use with adequate ventilation. When possible we recommend shaking the canister well before using. Attach and secure hose tightly onto the spray gun with required tip. Attach the other end of the hose onto the canister. Make sure the hose-valve connections are securely tight. Open the valve on the canister slowly and fully, check for leaks during this process. Unlock the trigger on the spray gun to start spraying.
• Prior to use, check compatibility by spraying a small test patch of the adhesive on the substrate.
• Make sure that surface is thoroughly dry before applying new adhesive.

Handling & Storage:

• Consult Material Safety Data Sheet prior to use.
• Do Not store at temperatures over 50°C.
• Avoid exposure to direct sunlight.
• Do Not store directly on concrete floor.
• For optimum performance, store at 18°C during use, but must always be above 10°C.
• When connected, keep valve open and hose pressurised at all times.
• Do not close valve until ready to connect to new cylinder.
• Release pressure in hose before disconnection.
• Always test product to determine suitability for your particular application prior to use in production.