Description
TN119 is a reverse wound self-adhesive foam tape. It is supplied in easy to use roll form. The product comprises a conformable 100% closed cell foam coated on one face with a high tack adhesive which is protected by filmic liner. Being closed cell, the product forms an excellent air seal under moderate compression.
Packaging
Thickness: 2, 3, 4, 5 & 6 mm Width: 6 to 1200 mm
Any width within the range noted above can be cut subject to minimum order quantities. Stock sizes are available and our Customer Services team can supply details as well as advise on cut to order sizes, minimum order quantities and lead time.
Technical Information
Foam Type: PE
Foam Density: 33 kg/m³
Adhesive Format: Single Sided
Adhesive Type: SSR
Tape Colour: Black
Application Temperature: +10°C to +30°C
Service Temperature: -10° to +60°C
Recommended Compression: 30
Storage: Store in shaded dry conditions between +5°C and +25°C
Shelf Life: 12 months when stored as recommended in original unopened packaging
Preparation
– Ensure bonding surfaces are free from irregularities and loose particles that may impair adhesion.
– Dust, dirt and grease can be removed using AT115 Solvent Cleaner. Where substrates are sensitive to solvent attack, clean with warm water and allow to dry.
– The substrate must always be dry before application of the tape.
Application
– Remove the closing tape at the start of the roll. Unwind the roll to expose the adhesive face, on the non adhesive face a film is added to aid easy unwinding of the roll, this is to be left in place.
– Place the tape onto the flange and apply pressure to consolidate the bond. At corners either form tight butt joints or v-notch the tape to form a continuous seal.
– For maximum air leakage performance use with LD410 or OS120.