illbruck ME501 Duo Window Membrane HD

illbruck ME501 is a high strength, tear resistant membrane made from polyethylene co-polymer film with non-woven fabric. It can be applied before or after window installation to suit on-site details and programming. It is also available with gasket options for fixing to window profiles.

ME501 Usage / Purpose

illbruck ME501 provides a high performance seal to the perimeter joint between the window/curtain wall and the construction reveal. Due to the intelligent, variable vapour permeability (sd value), when used in an internal UK (warm) environment, it will be vapour-tight, and when used in an external UK (cold) environment it will be vapour open. This means that the membrane is suitable for interior and exterior use providing an air-tight and weather-tight seal whilst always complying with inside tighter than outside principles.

Benefits

  • Complies with principle of ‘inside tighter than outside’ in order to facilitate efficient vapour control
  • BBA accredited alternative to EPDM in many applications
  • Excellent drying potential (due to the membrane’s vapour permeability) avoiding mould growth and physical damage
  • UV stable – will tolerate up to 9 months direct exposure prior to covering
  • Fully compatible with illbruck building protection membranes

For a quote for illbruck ME501 or expert technical help then please contact us today.

 


Description

Description
ME501 is a high strength, tear resistant membrane made from polyethylene copolymer film with non-woven fabric. It can be applied before or after window installation to suit on-site details and programming. It is also available with gasket options for fixing to window profiles. The product meets the recommendations of the RAL Quality Assurance Association for windows and doors. Successfully tested by MPA Hannover to EN1026 (airtightness) & EN1027 (weathertightness). The membrane is attached to the window with SP525* adhesive, enhanced ‘acrylic adhesive +’ strip, or integral gasket and to the construction reveal material with SP525* adhesive. ( * see below in ‘Please Note’ )

Product Variants
ME501 – membrane slit to required width, withoutadhesive (use SP525 to bond to frame and structure).
ME501 – standard widths of 150 mm & 300 mm, with gasket (use SP525 to bond to structure). There are four gasket options – see ‘Gasket Options’ on next page.
ME501 – with enhanced ‘acrylic adhesive +’ strip for bonding to frame (use SP525 for bonding to structure).

Colour
Black

Packaging
ME501 is supplied on 25 m rolls.

Dimensions
Slit to width 60 – 1,500 mm
Membrane thickness 0.6 mm
Length Tolerances to DIN 7715 P3
Width dimensions to tolerance ± 2.5 mm

Technical Information
Download Datasheet For ME501